Discover our new specialized high-performance cleaner and coating remover.
Seasonal deep cleaning, in particular, highlights just how crucial it is to reliably remove old coatings. Multiple layers of aged coatings or unknown existing coatings in newly acquired properties often lead to uncertainty during the planning phase. If the existing coating is not completely removed, it can lead to adhesion problems, cosmetic defects, or additional work due to necessary rework. In such situations, one thing matters above all else: a result that’s just right.
TEMPEX POWER was developed specifically to meet these requirements. Its powerful, solvent-enhanced formulation reliably and completely removes even heavily compacted, repeatedly re-coated, and highly cross-linked polymer films. Even when the coating conditions are unknown, TEMPEX POWER ensures safe and reproducible initial cleaning.
This is what a successful result looks like: less mechanical effort, reduced labor and time requirements, and significantly greater planning reliability for you. Thanks to the reliable removal achieved in the first pass, rework and additional passes are minimized—the surface is optimally prepared for a successful recoating in the next step.
TEMPEX POWER stands out thanks to these advantages
- Ideal for deep, pore-level removal of multiple layers of ONTOP
- Solvent-enhanced formulation
- Maximum delamination force
- Complete removal of even the most stubborn polymer films
- Excellent material compatibility, even on alkali-sensitive surfaces
- Pleasant scent during application
TEMPEX POWER significantly reduces the amount of work required and removes even the most stubborn polymer films almost on its own—with significantly less mechanical effort.
And best of all: TEMPEX POWER is now available at a special price as part of our 2026 Deep Cleaning and Coating Promotion. You can find all the details here>>
TEMPEX POWER* is suitable for these materials
- Linoleum
- Plastic Floor Coverings
- Polyvinyl chloride (PVC)
- Rubber
* Before use, check for material compatibility in an inconspicuous area and follow the manufacturer’s technical instructions.
How to Use TEMPEX POWER Correctly
Remove any coarse dirt from the floor. Depending on the age, number of coats, and type of coating, mix the product with cold water in a ratio of 1:2 to 1:3 (3 to 4 liters of TEMPEX POWER + 8 liters of water).
Apply the cleaning solution (500 to 650 ml/m²) and keep it moving manually during the 15- to 30-minute contact time.
Next, treat the entire surface using a single-disc machine and an appropriate pad or brush. Thoroughly vacuum up the dirty solution and rinse the surface with clean water. For heavily weathered and multi-coated surfaces, extend the processing time.