Seasonal deep cleaning in particular shows how crucial it is to reliably remove old coatings. Multiple layers of aged coatings or unknown old structures in newly acquired properties often lead to uncertainty in planning. If the existing coating is not completely removed, this can lead to adhesion problems, visual defects, or additional work due to necessary reworking. In such situations, one thing counts above all else: a result that is right.
TEMPEX POWER was developed precisely for these requirements. The powerful, solvent-enhanced formula reliably and completely removes even heavily compacted, repeatedly treated, and highly cross-linked polymer films. Even in cases where the coating situation is unknown, TEMPEX POWER ensures safe and reproducible basic cleaning.
This is what a successful result looks like: less mechanical effort, lower personnel and time requirements, and significantly greater planning reliability for you. Reliable removal in the first step reduces rework and additional passes—the surface is optimally prepared for a functional new coating in the next step.
TEMPEX POWER offers the following compelling advantages
Ideal for deep pore removal of multiple layers of ONTOP coatings
Solvent-enhanced formulation
Maximum decoating power
Complete removal of even the most stubborn polymer films
Excellent material compatibility, even on alkali-sensitive coatings
Pleasant scent during application
TEMPEX POWER significantly reduces the amount of work required and removes even the most stubborn polymer films almost by itself – with significantly less mechanical effort.
And best of all: TEMPEX POWER is now available at a special price as part of our 2026 deep cleaning and coating promotion. You can find all the information here>>
TEMPEX POWER* is suitable for these materials.
Linoleum
Plastic floor coverings
Polyvinyl chloride PVC
Rubber
* Before use, test material compatibility on an inconspicuous area and observe the technical instructions provided by the coating manufacturer.
How to use TEMPEX POWER correctly
Remove coarse dirt from the floor. Depending on the age, number of coats, and type of coating, mix the product with cold water in a ratio of 1:2 to 1:3 (3 to 4 liters of TEMPEX POWER + 8 liters of water).
Apply the cleaning solution (500 to 650 ml/m²) and keep it moving manually during the 15 to 30-minute application time.
Then treat the entire surface with a single-disc machine and a suitable pad/brush. Thoroughly vacuum up the dirty water and rinse the surface with clean water. For heavily aged and multi-coated surfaces, extend the application time.